Atm Error Code 33
It is feasible that this error code could be generated even if the lifts are in the up position. Inspect the note diverter in the note transport module. Replace the note qualifier or note transport if the problem persists. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. check over here
Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. Inspect for jammed currency in the feed path and at the Exit sensor. Inspect main board to electronic journal communication cable for damage. http://www.atmexperts.com/atm_error_codes.html
Atm Error Code 3-da000(80)
Results: No money is dispensed, screen and receipt display system unavailable. Put more currency in the cassette and repeat the “learn note thickness” command. If the error clears, put the cash dispenser in service. 5. Make sure the connectors are seated securely on the main board and on the electronic journal. 2.
- Clear all errors and test the dispenser by completing several TEST DISPENSES.
- Clear the error. 2.
- Carefully remove the double detect module from the note qualifier.
- Clear terminal error code.
Error Code: 146 Description: No reply from command to electronic journal. Host hung up. Clear the error. Sbi Atm Response Code List Pdf Make sure it is connected to CN1 on the printer control board.
If these actions have no effect on dispenser operation, print a dispenser status report, scan the click count history, starting at the bottom. Atm Error Code 3-da001 It will not place the cash dispenser "Out of Service". Error Code: 129 Description: No response from the dispenser mechanism. As always, please call us if you need additional support.
Replace the timing wheel or the timing wheel sensors if they are defective. Sbi Atm Response Code 168 Clear the jammed currency. 2. Inspect the note qualifier for any damage (i.e. Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable.
Atm Error Code 3-da001
Inspect electronic journal to dispenser communication cable for damage. Inspected both the feed sensor and the double detect sensor to ensure they are not blocked and operating correctly. Atm Error Code 3-da000(80) Error Code: 369 Description: Dispenser device reset. Atm Response Code 072 Recommended Action: This error code is reported by the dispensing mechanism when a document is jammed in the throat sensor during a live dispenses or when a reset is performed.
Inspect the cables connected to CN2, CN3, CN4, and CN5. check my blog Test the dispensing mechanism by completing several test dispenses. The cash dispenser will then attempt to complete a Reversal Transaction to notify the financial institution of the error. Find the first occurrence of â€ś116â€ť. Atm Response Code 070
Clean the exit sensor using a soft brush and a vacuum cleaner. Turn the AC power OFF for a few seconds and then back ON to power cycle and reset the cash dispenser. Clear any jammed currency. 2. this content Perform the test dispense function several times (two or three).
Determine what is causing the cassette to not stay locked in place. 4. Atm Error Code 68 Reset the error. Make sure the connectors are seated securely on the main board and on the electronic journal. 2.
If the error persists, replace the dispenser.
If replacing the modem does not correct the problem, replace the main board. 138 Printer failed while printing to the receipt printer 1. If the error clears put the cash dispenser into service. Place all belts on their respective rollers and gears. Ncr Atm Error Codes Verify that all access panels are closed and secured.
Cracked or broken clips should be replaced 4. Inspect the feed path for jammed notes. If the error clears, put the cash dispenser in service. have a peek at these guys Attempting to operate the cash dispenser without the reject vault will normally cause it to go to an "Out of Service" condition.
Make sure the diverter is not jammed. Open the Printer Bracket and verify that there are no jams in the printer or the paper path. Inspect the cassette and feed path for currency that is stuck together or jammed. 2. Clear terminal error code.
Open all access panels and inspect for jammed documents and other debris. Look up the definition on the Hardware Status listing. 4. Error Code: 115 (73h) Description: Diverter timeout on purge Recommended Action: 1. Error Code: 122 (7Ah) Description: Unexpected note at exit 1.
If the voltages are not within tolerance, the cable or power supply may be defective. 4. Do several test dispense operations. Error Code: 36 (24h) Description: Mistracked note at exit. There should be no jumpers installed. 2.
Recommended Action: This status occurs when a note is detected by the exit sensor when it should not have been. If the cables are undamaged, the main board or electronic journal may be defective 166 Bad dispense 1. Recommended Action: Enter management functions and configure the pin working key. Clear the error. 4.
Error Code: 351(63h)[c] Description: Module needs service. Inspect the cable supplying DC power from the power supply to the printer. Error Code: 11 Description: No connect Possible Cause: 1. a.
Remove any jammed notes. 2. If the status clears and the return code are normal place the cash dispenser in service.